O14 Ageing Chamber Calibration Kits
Available for quotation
O14 Calibration Kit
Need help selecting the right configuration? Speak to our team to get the best configuration for you.
O14 Ageing Chamber Calibration Kits
Wallace calibration kits help verify the performance of the Wallace PRI Ageing Chamber (O14) between maintenance visits, supporting good laboratory practice. Both Temperature and Airflow Calibration Kits are available to ensure optimal operation of your Ageing Chamber.
- Product Name
O14 Calibration Kit
- Overview
Wallace offer calibration kits to regularly verify the operation of the Wallace Rapid PRI Ageing Chamber (O14) as part of good laboratory practice. Kits available are Temperature Calibration Kit and Airflow Calibration Kit. This enables users to ensure their O14 is performing at its optimum in between maintenance visits.
- Standards
ISO 2007, ISO 2930, ASTM D3194
- Application
Provide verification readings of the O14 on a weekly basis or as per instructions based on usage levels.
- Calibration Options
Manufacturer Calibration Certificate included as standard
- Typical Lead Time
4-6 weeks (to be confirmed at time of quoting)
- What's Included?
- Handheld Meter
- Custom Temperature Probe Tray
- AAA Batteries
- User Manual
- What's Included?
- Custom Air Flow Meter
- User Manual
- Attachments
-
-
O14 Calibration Kits Data Sheet 302 KB
-
Specifications
| Calibration Kit - Temperature | |
| Part Number | WAO14-CAL-01 |
| Kit Box Dimensions (mm) | 330 (h) x 380 (w) x 190 (d) |
| Kit Weight | 1.42kg |
| Operating Temperature | 5 to 40°C; Altitude 2000m maximum |
| Humidity Range | 10 to 80% RH non-condensing |
Included
| Included | Application | Quantity |
| Handheld Meter | Temperature | 1 off |
| Custom Temperature Probe Tray | Temperature | 1 off |
| AAA Batteries | Meter | 6 off |
Specifications
| Calibration Kit - Air Flow | |
| Part Number | WAO14-CAL-02 |
| Kit Box Dimensions (mm) | 175 (h) x 195 (w) x 45 (d) |
| Kit Weight | 372g |
| Operating Temperature | 5 to 40°C; Altitude 2000m maximum |
| Humidity Range | 10 to 80% RH non-condensing |
Included
| Included | Application | Quantity |
| Custom Air Flow Meter | Air Flow | 1 off |
Temperature Calibration
Temperature probes are connected to a handheld meter and inserted into Chamber 3 of the Ageing Chamber and left for a period of approximately 20 minutes. A successful reading of 140.0 ±0.1°C displayed on the handheld meter indicates the chambers are maintaining temperature. It is important that on completion of the calibration test, the probe tray is set aside to cool before returning to storage.
Air Flow Calibration
An air flow indicator is connected to the filter inlet at the rear of the O14 to show the operating air flow rate. In order to comply with the standard, which requires an air flow rate suitable to change the air 10 volume times per hour, an air flow rate of 250 ± 50 cc/min is required. A low air flow reading, even within the range, can mean that the filter needs replacing. The life of the filter is highly dependent on the environment in which the Ageing Chamber is operating.
-
Included Application Quantity Handheld Meter Temperature 1 off Custom Temperature Probe Tray Temperature 1 off AAA Batteries Meter 6 off -
Included Application Quantity Custom Air Flow Meter Air Flow 1 off -
We recommend best practice is the use the Temperature and the Airflow Calibration Kits monthly. This is, however, depend on usage frequency. If you would like further clarification please contact us.
-
Please contact us with your specific requirements.
