Features

• Reduces operator error when logging results
• Flexible graphical facilities
• Statistical Analysis
• Data easily exported to word processors, spreadsheets and databases
• Versatile printing facilities
• Various analysis options

Syetem Requirements

• An IBM Compatible 486 or better.
• Windows 3.1, 95, 98 or 98 SE
• Minimum of 4MB RAM & 3MB hard disk space using Windows 3.1 (8MB for Windows 95 or 98).
• The program is distributed on a single 3.5" 1.4MB disk.
• The Wallace DCS software is easy to operate, through a standard Windows interface, providing a flexible data control system. It has been designed for use with Wallace Cogenix Hardness Testers, H12, H14 and H17A.

The Software Provides

• User friendly Windows interface for advanced data control.
• Ease of access to test parameters, such as Test Times and Type Password Protection Facility.
• Settable Gate Limits. 
• Report and Notes sections.
• Storage of instrument parameters.
• Use of Methods for commonly repeated samples.
• Calibration and service reminder.

Data Collection

Data may be collected quickly and simply at the touch of a button. Every result is placed into a grid, along with further details if required (e.g. sample identification and operator). Further information relating to the test and sample may be added (e.g. order, batch and manufacture details). The test conditions, such as the date and time are stored automatically.
The results, along with any other information may be easily stored, retrieved and printed.

Graphical Facility

The graphical facility provides a flexible tool in which to plot some or all of your data. The easy to use format allows you to change the type of graph as well as the scale and the analysis used (e.g. mean, standard deviation).

Printing Facility

A report can be generated at the touch of a button, with as much or as little detail as required, including order, batch, manufacture and sample details, company and customer details, collection, instrument and page layout details. A graph of the data may also be included.

See the table below for a run-down of this product's specifications.

Dimensions:	214mm (w) x 255 (d) x 300 (h)
Weight:	7.5kg including power supply
Resolution:	Better than 0.2 IHRD
Indentor:	2.5mm diameter ball
Standard Test Time:	Primary Load 5 sec; Secondary load 30 sec
Standards:	BS 903: PCAA26 ISO 48 DIN 53519 ASTM1415
Software Requirements:	IBM compatible 486 or better. Minimum 4MB RAM. Windows 3.1 or higher. VGA or comaptible graphics card at 600 x 800 resolution. 3MB of hard disk space is required for the program to install and run properly. (Software will not run on Microsoft operation systems after Windows 98 Second Edition.)
Data Terminal Dimensions:	290 mm (w) x 150 (l) x 140(d)
Weight:	495g
Printer Dimensions:	105 mm (w) x 195 (d) x 90(h)
Weight:	625g including power supply

H14/1 Macro Hardness Tester, Standard Version

• Fully Automatic Operation
• Digital Display with programmable resolution to 0.1 or 0.5 unit
• PVC Softness Mode
• Built in Diagnostics
• Visual Indication of lndentor / Foot contact
• Alternative indentors and feet for H & L tests easily changed

To find out more about this product contact Wallace

H14/2 Printer Version

Features

• Compact Printer with high speed print capability
• 24 Character column print output
• Sample identification with automatically increasing suffix
• Date and Time Recording
• Traceability of aborted tests
• Alternative language settings

To find out more about this product contact Wallace

Additional Features

• The H12/2 Printer model of the Micro Hardness Tester is supplied with a high speed 24 character printer.
• Hard copy of results can be retained and sample identification with incrementing suffix can be enabled through the printer as well as date and time recording.
• The printer is supplied with a rechargeable battery and charger/ mains converter.
• Additional diagnostic features are also available with this version.
• Printer output is available in different languages.

H14/3 Data Input Terminal and Printer Version

Features

• Data input terminal and display
• High speed printer
• Data entry
• Variable primary and secondary load duration protected by password
• Calibration check
• Operator identification

To find out more about this product contact Wallace

Additional  Features

• Supplied with a small Data Input Terminal incorporating a 16 character 2 line dot matrix display and high speed printer, this version allows data entry and password protection primary / secondary load duration.
• Other attractive features offered on this version include operator identification, customer calibration check and enhanced print modes.
• The printer allows hard copy results to be retained for further use.
• The combination of Data Input Terminal and Compact Printer is ideal for the user wanting to change parameters such as Test Duration, Operator Identification and Sample Number.
• Printed reports are available in either short or enhanced formats.