Features
Features One touch results
Value frozen until reset
Easy access to sample table
Four models offered
Range of sample tables available
To find out more about this product contact Wallace
Download the datasheet
Four models of the H17A Shore Hardness Tester are offered:H17A/1, the basic stand-alone instrument
Features for all models
The design, the result of considerable consultation with customers, is robust and constructed from aluminium castings which with anti-vibration feet results in exceptional stability.
All versions conform to many National and International Standards.
Specifications
Specifications
See the table below for a run-down of this product's specifications.
Dimensions:
214mm (w) x 255 (d) x 300 (h)
Weight:
7.5kg including power supply
Resolution:
Better than 0.2 IHRD
Indentor angle:
35 o ± ¼ o Truncated cone
Standards:
BS 903: Part A57; ISO 7619; ASTM D2240; DIN 53505; JIS 6301
Software Requirements:
IBM compatible 486 or better. Minimum 4MB RAM. Windows 3.1 or higher. VGA or comaptible graphics card at 600 x 800 resolution. 3MB of hard disk space is required for the program to install and run properly. (Software will not run on Microsoft operating systems after Windows 98 Home Edition.)
Data Terminal Dimensions:
290 mm (w) x 150 (l) x 140(d)
Weight:
495g
Printer Dimensions:
105 mm (w) x 195 (d) x 90(h)
Weight:
625g including power supply
Shore A Scale Hardness Tester - Variants
H17A/ Shore A Scale Hardness Tester, Basic Model
Features
Fully Automatic Operation
Digital Display with programmable resolution to 0.1 or 0.5 unit
Built in Diagnostics
Visual Indication of lndentor / Foot contact
To find out more about this product contact Wallace
H17A/2 Printer Model
Features
Compact Printer with high speed print capability
24 Character column print output
Sample identification with automatically increasing suffix
Date and Time Recording
Traceability of aborted tests
Alternative language settings
To find out more about this product contact Wallace
Additional Features
The H17A/2 Printer model of the Shore 'A' Scale Hardness Tester is supplied with a high speed 24 character printer.
Hard copy of results can be retained and sample identification with incremental suffix can be enabled through the printer as well as date and time recording.
The printer is supplied with a rechargeable battery and charger/ mains converter.
Additional diagnostic features are also available with this version.
Printer output is available in different languages.
H17A/3 Data Input Terminal and Printer Mode
Features
Data input terminal and display
High speed printer
Data entry
Calibration check
Operator identification
To find out more about this product contact Wallace
Additional Features
Supplied with a small Data Input Terminal incorporating a 16 character 2 line dot matrix display and high speed printer, this version allows data entry and password protection of user definable test parameters.
Other attractive features offered on this version include operator identification, customer calibration check and enhanced print modes.
The printer allows hard copy results to be retained for further use.
The combination of Data Input Terminal and Compact Printer is ideal for the user wanting to change parameters such as Test Duration, Operator Identification and Sample Number.
Printed reports are available in either short or enhanced formats.
